Niko 10-020-01 Mode D'emploi page 13

10-020-01 & 10-030-01
LED indication on the internal unit
LED indication
red
3x red blinking (6s) after picking up the
receiver
5x red blinking (10s) after call at the
external unit
Demounting
At the top, the internal unit is provided with a small opening (fig.4). Exert slight pressure by means of a suitable
screwdriver until the bolt comes loose. Remove the internal unit from the mounting plate.
PRODUCT MAINTENANCE
By means of the following maintenance tips we want to ensure that the surfaces of these products are not dam-
aged by improper use. Damage by improper use is not covered by the guarantee.
Maintenance tips
- It is sufficient to clean the products with soap and a damp cloth.
- You are strongly advised not to use any of the following:
- Abrasive sponges or abrasive detergents;
- maintenance products containing solvents or acids, or cleaning products containing acetic acid
- high pressure cleaner.
EN
description
ring tone switched off
A speech connection to another internal unit has already been
established. This is only possible if an audio internal unit is also
connected.
A speech connection to another internal unit has already been
established.
This is only possible if an audio internal unit is also connected.
13