Velleman PEM7D Mode D'emploi

1. Introduction & Specifications
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
The PEM7D is a compact entry and approach warning system for use in shops, reception areas, private homes, etc.
The device consists of a transmitting and receiving unit that transmits an invisible, modulated beam of IR light across
e.g. a doorway, onto a prismatic reflector mounted across from the transmitter. This reflects the beam back to the
receiver to complete the protection circuit. The beam is interrupted when a person walks through it, causing the alarm to
trigger and sound an audible warning. The beam is produced by a LED, which has a much greater lifespan and is less
susceptible to surge and vibration damage than a tungsten filament lamp. The receiver is only sensitive to the frequency
of the modulated light in the beam.
2. Contents
• 1 x retro-reflection photoelectric beam sensor
• 1 x DC 9V adapter
• 1 x alarm speaker
3. Specifications
GENERAL
Nominal Detection Range
Supply Voltage
Light Source
Output
Ambient Temperature
SYSTEM
Power Supply
Total Current Consumption
Standby Current
SPEAKER
Supply Voltage
Speaker Output
Speaker Time
Adjustable Timer
Adjustable Volume
External Output
PEM7D
PEM7D – MINI IR SECURITY SYSTEM
7m
DC 9-15V
IR LED
NPN open collector
-20 to +50°C
AC to DC adapter 9V (included)
< 100mA
25mA
DC 9V
Chime / Off / Alarm selectable through switch
± 1 second for chime, 30sec. for alarm
3-30sec. for alarm
yes (from 0 to max.)
NPN output (for external device e.g. counter)
- 1 - VELLEMAN