Velleman PEM7D/C Mode D'emploi

PEM7D/C – COUNTER FOR MINI IR SECURITY SYSTEM PEM7D
1. Introduction
Thank you for buying the PEM7D/C 4-digit counter! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer. The counter should come
with this manual, a 10m connection cable and a mounting bracket with mounting screws.
2. Mounting
Fix the mounting bracket to the wall by means of the provided screws
(see figure on the right).
Then attach the PEM7D/C by sliding it downward over the bracket.
3. Connection
4. Use
Above the 4-digit display is a power LED that lights up when the PEM7D/C is correctly connected to the PEM7D.
Under the display are 3 buttons: "+" (to manually add 1 to the count), "-" (to manually subtract 1 from the count) and
"RESET" to reset the count to "0000". You can keep "+" or "-" pressed for more than 1 second for quick operation.
Hence, the PEM7D/C can also be used as a manual counter, but it has to be connected to the PEM7D in order to
receive power.
5. Specifications
Input voltage
Ambient temperature
Dimensions (WxHxD)
Display
Current consumption
0000 48.7mA±10%
1111 30.7mA±10%
2222 44.7mA±10%
3333 44.7mA±10%
4444 40.5mA±10%
The information in this manual is subject to change without prior notice.
Dispose of this product in accordance with local and national disposal regulations.
PEM7D/C
Fig.2
9-15Vdc
-25°C~45°C
58 x 67 x 24mm
4 red digits
see table below
5555
6666
7777
8888
9999
Connect the PEM7D/C to the PEM7D by plugging the
enclosed cable into the input of the PEM7D/C and the
output on the speaker of the PEM7D.
44.7mA±10%
18.7mA±10%
36.0mA±10%
52.7mA±10%
48.7mA±10%
1
Fig.1
VELLEMAN