Install The Digisender® X7 Receiver Unit - DigiSender X7 Mode D'emploi

STEP 4
Install the DigiSender® X7 Receiver Unit
The DigiSender® X7 Receiver will pick up transmitted signals from the transmitter
unit and output them to a television. In addition, the receiver detects remote
controls being used in the second room and will send those signals to the source
equipment in your main lounge.
STEP 1
Place the DigiSender® receiver on a flat surface
near to your second television. Avoid placing the
receiver directly on top of other electrical devices
such as the television.
STEP 3
Ensure that both the A/V Channel and IR Channel
are set to 1.
See the trouble shooting sections for further
information on the channel selection process.
Please read this instruction manual carefully prior to installation
STEP 2
Connect the SCART output to the second
television.
No SCART socket on the TV
AEI produce an 'Aerial
Convertor ' enabling
you to connect
the receiver to
any TV without a
SCART socket.
Ask for part
number
MOD01PIS
ENGLISH
DG440 - DigiSender® X7
??
Page 9