Connections; Antenna/Cable; Other Connections - LG 50UR770H0UA Guide De Configuration Rapide

Masquer les pouces Voir aussi pour 50UR770H0UA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connections

You can connect various external devices to the TV.
For more information on external device's connection,
refer to the manual provided with each device.

Antenna/Cable

Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
cable.
Copper wire
• Complete all connections between devices, and
then connect the power cord to the power outlet to
prevent damage to your TV.
• Use a signal splitter to use 2 TVs or more.
• This TV cannot receive ULTRA HD (3840 x 2160
pixels) broadcasts directly because the related
standards have not been confirmed.
(Depending upon model)

Other connections

Connect your TV to external devices. For the best
picture and audio quality, connect the external device
and the TV with the HDMI cable.
HDMI
• Supported HDMI Audio format:
(Depending upon model)
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz
/ 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
• DTV Audio Supported Codec: MPEG, Dolby Digital
Settings] [HDMI Ultra HD Deep Color]
Frame Rate
Resolution
(Hz)
3840 x 2160p
50
4096 x 2160p
59.94
60
If the device connected to Input Port also supports
ULTRA HD Deep Color, your picture may be clearer.
However, if the device doesn't support it, it may not
work properly. In that case, change the TV's [HDMI
Ultra HD Deep Color] setting to off.
- This feature is available only on certain models
which support HDMI ULTRA HD Deep Color.
USB
• Some USB Hubs may not work. If a USB device
connected through a USB Hub is not detected,
connect it directly to the USB port on the TV.
• It is recommended that you use a USB hub or USB
HDD with a power supply. (If the power supplied is
not sufficient, the USB storage device may not be
detected properly.)
• It is recommended that you use an external USB
HDD with a rated voltage of 5 V of less and a rated
current of 500 mA or less.
[Picture] [Additional
On
4:4:4
8 bit
4:2:2
8/10/12 bit
4:2:0
10/12 bit
Off
4:2:0
8 bit
13

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

55ur770h0ua50ur770h9ua55ur770h9ua50ur760h9ua55ur760h9ua

Table des Matières