86
www.electrolux.com
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
9.4 Closing the door
1. Clean the door gaskets.
10. NOISES
CLICK!
11. TECHNICAL DATA
The technical information is situated in
the rating plate on the internal side of the
appliance and on the energy label.
Voltage
12. INFORMATION FOR TEST INSTITUTES
Installation and preparation of the
appliance for any EcoDesign verification
shall be compliant with EN 62552.
Ventilation requirements, recess
dimensions and minimum rear
SSSRRR!
BLUBB!
220-240 V
2. If necessary, adjust the door. Refer
to "Installation" chapter.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
Frequency
clearances shall be as stated in this User
Manual at Chapter 3. Please contact the
manufacturer for any other further
information, including loading plans.
BRRR!
HISSS!
50 Hz