EN
WARNING! Read this manual carefully before using your appliance!
This manual forms an integral part of the general installation and operation instruction enclosed with your
appliance. All requirements of the general instructions for installing and connecting the water heater to the water
and electricity mains are unconditionally valid. You must comply with the requirements set out in other sections
of the general instruction.
This manual explains the special features and the method of use of the electronic control unit, which replaces the
traditional thermostat and switch of conventional water heaters.
If your water heater has a factory fitted power supply cord combined with a plug, the plug is the means of
disconnect from the electric mains, while switching on/off the appliance from the electronic control is just a
function.
Buttons:
1 –
⏻ Switch operation modes
„Exit" or „Settings menu"
2 –
▲„+" or „Up"
A short press enters the „Settings" mode of the set temperature.
„Delayed start" – after pressing for 2 sec.
3 –
▼ „-" or „Down"
A short press enters the main menu
4 –
„Information"
Г
„Confirmation" (ОК) in „Settings menu"
Date / Error messages
Additional information
Operation mode
MAIN SCREEN
Clock
Symbol indicating an active heating element
Created Internet connection
Water temperature
EN
1
2
3
4