Sensitivity Settings For Acoustic Transmitters; Connecting Additional Modules To The »Ibell - HumanTechnik iBell-2 Mode D'emploi

The transmitters register the »iBell-2« signal and convert it into a radio signal.
These wireless radio signals are transmitted to the according receivers, which
then indicate the event.
Please note: Devices of the alerting system »lisa RF« cannot be combined with
devices of the alerting system »signolux«.
Sensitivity adjustment of »lisa RF telephone transmitter acoustic« and
»signolux Acoustic Universal Transmitter«
Set the sensitivity control of the according transmitter to the highest setting (turn
clockwise until limit). The transmitter will now react upon the vibration alarm of
the mobile phone.
Connecting additional modules to the »iBell-2«
Signal emitter modules (vibrating pillow, flash mo-
dule MF-1, acoustic module MA-1 or switch modu-
le MS-1) can be connected with the »iBell-2« via its
connection socket on the rear.
Plug one end of the supplied lead into the AUX
connector socket of the »iBell-2« and the other
Vibrating pad
»iBell-2«
end of the lead in the module's connection jack.
Battery life
Battery endurance my vary strongly, according to the quality of the batteries
purchased.
Under normal conditions, a set of new batteries should last approx. 6 months
and more.
18 English