Olympus FL-900R Mode D'emploi page 28

Adjusting Settings
Using the Selector Using the Selector
Frequently-used options can be accessed via the selector.
Button
Press ZOOM (F) button to display settings and rotate the dial to adjust
the angle of illumination manually. Press OK button to put the changes
ZOOM
into effect.
(F)
• "M" appears in the display when the angle of illumination is adjusted
manually.
Press
compensation by up to ±5. Press OK button to put the changes into effect.
(H)
• This value is combined with adjustments to fl ash compensation made
using the camera.
If you fi rst press the MENU/ (G) button and select [Manual] for [LED
Mode] (P. 34), you can turn the LED light on and off manually. Press the
(I)
• A
Pressing the MENU/ (G) button displays custom settings. See "Using
the Menus" on page 34. Pressing the MENU/ (G) button for 2 s locks fl ash
controls (control lock). The controls can be unlocked by again pressing the
MENU/
MENU/ (G) button for 2 s.
(G)
• A
• The LED light function of the
the TEST button are not affected by control lock.
Using the Control Panel Using the Control Panel
The control panel can be used to select items and choose options, for example
when adjusting related settings after choosing a fl ash control mode using the
MODE button.
1
Press the OK button.
• The most recently selected item will be
highlighted.
2
Press FGHI to highlight items and press
the OK button to select.
28
EN
(H) button to display settings and rotate the dial to adjust fl ash
(I) button once to turn the LED light on and again to turn it off.
icon is displayed when the LED light is on.
icon is displayed when controls are locked.
Function
(I) button and the test fl ash function of
MODE ZOOM
A
M 25
mm
Gno DISTANCE
40 2.5
m
MODE ZOOM
A
M 25
mm
Gno DISTANCE
40 2.5
m
LED
A
OFF
LED
A
OFF