Gallagher Fence monitor Notice D'installation page 10

Changing Zones
To change an exis ng fence zone number to another zone.
1. Put the Energizer into Standby mode ( ).
2. Remove the cover.
3. Set orange dial to the required zone.
4. Replace the cover.
5. Turn the Energizer on.
Both the old and new zone numbers will be displayed on the
Energizer Controller.
Important: If you do not delete the old zone number, and
subsequently try to display the ac vity for this zone on your
Energizer Controller, it will display Er 21.
Dele ng an Unused Zone
To delete a zone from the Energizer Controller.
1. Press the Se ngs bu on (
2. Using the arrow keys, scroll to the unwanted zone number.
3. Hold down the + and - bu ons for 6 seconds.
Important Battery Information
• Only use Alkaline (AA) ba eries
• Remove ba eries when not in use
• Es mated ba ery life: 1-2 years
Low ba ery indica on is shown on controller as below:
10
).
1 1
Low ba ery
indicator