Installation; Installation Sequence - Comunello SMART Mode D'emploi Pour L'utilisation Et L'entretien

5. INSTALLATION

With bottom-hung windows, there is a danger of potential injury resulting from the window accidentally
falling.
It is OBLIGATORY to fit limiting arms (of the Series 1276 type), or an alternative safety system, of a suitable size
to prevent the window from accidentally falling down. In case of testing before installation, please move the chain
only when opening.
Top-hung outward opening window: Overall dimensions and fixing holes
54.4
15.2
15.2
Bottom-hung inward opening window: Overall dimensions and fixing holes
27
27
FILO SERRAMENTO
FILO SERRAMENTO

5.1 Installation sequence

Check that the width of the window, where the actuator is due to be fitted, is more than 320 mm. Otherwise, it is
NOT POSSIBLE to fit the actuator.
Check that the force required to open/close it (calculated according to the table under Point 4.2) is less than or equal
to that shown in the TECHNICAL DATA table.
Try manually the window opening, checking for and if necessary eliminating any sticking points that could cause
a malfunction.
Manually test the maximum opening of the window, checking that it is greater than the travel set by the actuator.
54.4
FILO SERRAMENTO
FILO SERRAMENTO
27 180
27 180
278
278
268
268
180
180
27
27
27
27
9.5
9.5
42
42
99
99
105
105
55
55
99.5
99.5
7