Door Removal Instructions - AEG 9000 LONGFRESH Manuel De L'utilisateur

26 www.aeg.com
To make final door height adjustments:
1. Open freezer drawer to make lower
hinge visible.
2. Insert 6mm Allen wrench into the
shaft of the lower hinge.
3. Adjust the height by turning clockwise
or counterclockwise. Turning
clockwise will lower the door. Turning
counterclockwise will raise the door.
Default setting is to the lowest height.

12. DOOR REMOVAL INSTRUCTIONS

12.1 Getting through narrow
spaces
If refrigerator will not fit through an
entrance area, doors can be removed.
Check first by measuring the entrance.
To prepare for removing the
doors:
1. Make sure the electrical power cord
is unplugged from the wall outlet.
2. Remove any food from the door
shelves and close the doors.
To remove the refrigerator
doors:
1. Open doors to 90°.
2. Remove all five Phillips screws from
top hinge cover and lift up.
11.6 Flipper Mullion
Adjust Flipper Mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded
and perpendicular to the fresh food door.
If the mullion guide is not in the correct
position, it could prevent the door from
closing completely.
3. Trace lightly around the door's top
hinges with a pencil. This makes
reinstallation easier.