Delivery Status - Gloria Prima 5 Plus Mode D'emploi

RZ_prima 5+.qxp_Text_EN_prima 5 PLUS 21.12.18 12:12 Seite 13
3 Before using the device
3.1 Delivery status >>
page 2):
A Pump handle
B
Pump body
C Hose connection
D Spray tube holder 1
E Spray tube holder 2
F Fill level control
G Base ring
H All-plastic quick closure valve
I Plastic spray tube with nozzle
4 Technical data
Pressure Sprayer: prima 5 Plus; Article number: 000106.0000
Permissible positive operating pressure 3 bar / max. filling quantity: 5 litres / total filling quantity:
8 l / permissible operating temperature: 0°C – 40°C / empty weight: 1.4 kg / total weight: 6.4 kg /
reaction force on the nozzle: < 5 N / spray tube holder / piston-type pressure gauge with built-in
safety valve / container material/pump material: polyethylene
Notes regarding the nozzle
Spray Bore hole min.
pattern clearance
hollowcone
5 Assembly >> Figures
6 Commissioning
6.1 Filling container with water, applying pressure & checking safety valve
"L" >>
6.2 Venting container, emptying water & filling with plant protection
product >>
ATTENTION
must be observed.
6.3 Applying pressure and spraying >>
 Lock the pump handle "A" after the pumping process by press the pump all the way down and
turning the pump handle in a clockwise direction beyond the resistance until it stops.
 Press down the control lever on the quick closing valve; this triggers the spraying process.
 Pump when the spray pressure decreases or the yellow marking on the piston gauge is no longer
visible. Do not exceed the permissible operating pressure of max. 3 bar.
Yellow marking:
You are working with the optimum
spray pressure.
The device is shipped as standard as follows
Sprayangle
in l/min at pressure/bar
1 mm 0-60° 0,33/0,43/0,49/0,54
1,5 / 2,0 / 2,5 / 3,0
–
1
–
Figures 7
5
Figures –
8 11
Information from the spraying agent manufacturer and dosage instructions
J 40 cm extension tube
K
Carrying straps
L Piston -type pressure gauge with built-in
safety/pressure relief valve
M Filling funnel
N 1 x user manual and product information
Any accessory parts are packaged separately as
part of the delivery.
Flow rate Material
brass
4
12 – 18
Figures
Red marking: If you exceed the
optimum spraying pressure, do not
continue to SPRAY, vent the device.
13
(see figure on
Optim. pressure Filter
1,5 - 3 bar Serie