Publicité
Les langues disponibles
Les langues disponibles
Putting on
- Make sure that the draining tap is closed.
- Pour oil into the container when heating elements are cold. The oil level must be be-
tween the MIN and MAX marks.
- Turn on the commutator (n°2 on picture) ont one of the position according to the desired
power
- Turn the thermostat control knob (n°4 on picture) to the desired position.
- When the orange pilot light is off, your deep fryer is ready for cooking
- Fill the basket in and plunge it slowly into the oil.
- When cooking is finished, lift the basket and set it on its stand.
Safety thermostat
In case of overheating or lack of oil, your deep fryer will automatically stop. Unplug it
and let it cool. Then check the oil level:
1) Oil level is too low: add some oil and reload the knob (n°2 on picture)
2) Oil is too old: change it and reload the knob (n°2 on picture)
3) Other cases: call your after sale service
Stopping the appliance
- Set the thermostat control knob to zero
- Set the commutator to zero
- Unplug the appliance.
- Let the device cool.
- Clean the appliance (See 6.Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and confide any
technical operation to qualified person.
18
Publicité
