Publicité
Les langues disponibles
Les langues disponibles
- Remove the protective film around the machine.
- Screw up the handle on the lid.
- Place the fryer on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials even if
it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Place the product to enable easy access to the plug.
- Then place all the accessories.
- Keep the lid near the fryer to enable you covering it after use or in case of fire.
b) First starting:
Before the first use, wash the machine and all accessories.
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values indicated
on the descriptive plate.
- Check that neither the cord nor the plug are damaged.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with the earth.
- The device is connected.
The machines intended to be linked in a permanent way with the fixed pipes must be provided
with a device of disconnection.
NB: in case of connection of the device in a plug without earth protection or directly on the
electricity network, confide its connection to a qualified person.
c) Use of device :
Command and display
Thermostat (n°4 on picture)
Tripolar safety thermostat
Microswitch
Commutator (n°2 on picture)
Orange pilot light (n°3 on picture)
Green pilot light (n°1 on picture)
Function
Temperature setting
Automatic stop in case of overheating
Automatic stop in case of improper posi-
tioning of the control unit
Selection of the power
Oil is warming (pilot light on)
Oil is hot (pilot light off)
Machine is on (pilot light on)
Machine is off (pilot light off)
17
Publicité
