La Sommeliere DVV4SSE Manuel D'utilisation page 21

4. Screw the knob clockwise as far as possible. Store the bottle on a level surface, out of
moisture and out of the reach of children. Do not expose to the sun and high temperatures.
Add / remove a wine bottle
•
The appliance can hold 4 bottles of wine.
•
Each bottle location is linked to an LCD control screen. After placing the bottle in a location,
connect there to the device by placing the connector plug in the neck of the bottle.
•
The tube that connects the connection cap to the device is adjustable to adapt whatever the
height of the bottle. Just squeeze it and pull it gently to match the length of the tube to the
bottle.
•
It is necessary to prime each bottle of wine with a first distribution. Please note that the
quantity may vary slightly during the first dispensing.
•
To start dispensing, set an amount of 20ml on the LCD screen located above the desired
bottle, using the "+" and "-" arrows.
•
Present an empty glass in front of the tap (in prevention), press "Wine"
•
Gas is released into the bottle which is now ready for use.
•
You can then set the desired amount of wine on the LCD screen.
•
Warning ! Priming is mandatory after each bottle change.
20