Publicité
Les langues disponibles
Les langues disponibles
appliance is in good condition.
▪
Use a soft, dry cloth to wipe down the outside of the wine dispenser thoroughly.
▪
Before connecting your wine dispenser to the power source, let the unit stand upright
for 24 hours. This will reduce the possibility of a malfunction in the cooling system
from handing during transportation.
Locating your unit
When selecting a location for your appliance you should make sure the floor is flat and firm, and
the room is well ventilated. An average ambient temperature must be observed. This temperature
is specific according to the climatic class of the device: SN-N-ST : This refrigerating appliance is
intended to be used at ambient temperatures ranging from 10 °C to 43 °C
▪
Not intended for garage or basement installation.
▪
Place your wine dispenser on a solid, level surface (other than carpet). This will ensure
vibration and noise - free operation. Use the adjustable legs to ensure that the unit is
level.
▪
Leave a 5 - inch clearance on all sides of the unit. This is to ensure proper circulation.
IV - OPERATING YOUR WINE DISPENSER
Add / remove a gas bottle
1. Insert the gas cartridge (not included) into the regulator supplied with the device.
2. Screw the cartridge into the regulator until it stops.
3. Insert the blue connection pipe placed behind the device into the pressure reducer fitting until
it stops.
19
Publicité
