Bose Professional DesignMax DM6SE Notice D'installation page 4

Setup
Installation Options
q
Installation Options and Accessories
q
Mounting bracket (included)
w
MBPWR-50 pan-and-tilt bracket (optional)
Single In
Preparing the Weather-resistant Input Cover
The weather-resistant input cover is designed for three different wiring scenarios (see above). To change the configuration of the input
cover to support your wiring scenario, cut along the perforation on the rubber conduit.
Note: Indoor-only applications do not require use of the input cover.
4 • English
w
In and Out
Note: If installing the loudspeaker with the rubber conduit facing
upward, it is the installer's responsibility to seal against water ingress
into the Euroblock connector.
Note: If using the wide open rubber conduit configuration, it is the
installer's responsibility to seal against water ingress into the Euroblock
connector.
PRO.BOSE.COM
Wide Open
DesignMax DM6SE • Installation Guide