Installation Instructions; Before Using Your Appliance; Installing Your Appliance - Summit SWC1127B Mode D'emploi

INSTALLATION INSTRUCTIONS

Before Using your Appliance

Remove the exterior and interior packaging, and check to make sure you have the following parts:
SWC1127B & SWC1926B & SWC1966B
(LWC1Z96 & LWC1Z193 & LWC2Z194)
Instruction Manual
Wooden Shelves
Door Handle
•
Before connecting this appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
•
The appliance is specially designed for wine storage; please do not put in other goods or food.

Installing your Appliance

•
This appliance is designed for freestanding or built-in (fully recessed) installation.
•
Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level
your appliance, adjust the front leveling legs at the bottom of the appliance.
•
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extremely cold ambient temperatures may also cause the unit not to perform
properly.
•
Avoid locating the unit in moist areas.
•
Plug the appliance into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or a service
center authorized by Felix Storch, Inc.
SWCP2116 & SWCP2163
(LWC2Z97 & LWC2Z195)
Instruction Manual
Wire Shelves with Rolling Slideways
Door Handle
9