Troubleshooting - Summit SWC1127B Mode D'emploi

You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the service technician.
Problem
The appliance is not running.
The appliance is not cold enough.
The compressor starts and stops frequently.
LED lights do not operate.
Vibrations
The appliance makes too much noise.
The door does not close properly.

TROUBLESHOOTING

Possible Causes
• The appliance is not plugged in.
• The appliance is not turned on.
• The voltage of the installation is not correct.
• The circuit breaker or fuse may have blown.
• Check the temperature control setting.
• Check if the ambient temperature is beyond
the appliance's operating temperature.
• The door is opened too frequently.
• The door is not closed properly.
• The door is not sealing properly.
• Insufficient free space around the appliance.
• The external temperature is high.
• A large quantity of bottles has been put into
the cellar.
• The appliance is opened too frequently.
• The door is not properly closed.
• The appliance has not been properly set.
• The appliance is not plugged in.
• The fuse has blown.
• LED lights are broken.
• The light switch is off.
• Check and ensure the appliance is level.
• The rattling noise may come from the flow of
refrigerant, which is normal.
• Water can be heard circulating at the end of a
cooling cycle.
• Expansion and contraction of the internal
walls may cause a cracking sound.
• The appliance is not level.
• Check if the fan is in good condition.
• The appliance is not level.
• The door seal is dirty or damaged.
• The shelves are not positioned correctly.
• A part of the contents is preventing the door
from closing.
20