Publicité
Les langues disponibles
Les langues disponibles
Positioning
Positioning
Since the communication is performed with the fl ash emission of the camera, the fl ash positioning
range varies with camera.
1
1
2
Position the fl ash facing the desired direction.
•
Instead of using the stand, you can also shoot simply holding the fl ash.
x
Notes
•
The built-in fl ash can not be used as a light source in RC mode.
•
We recommend using a single group of up to three remote fl ash units.
•
Flash may not fi re due to the angle or distance between the camera and the object.
Take a test shot after positioning.
1
2
2
Attach the stand provided.
•
Slide the fl ash securely into the stand until
it clicks into place ( 1 ). Press the shoe lock
release button to remove the fl ash.
When using it for bounce, be careful not to drop
off the stand ( 2 ).
13
EN
Publicité
