Scope Of Application; Overview/Cleaning; Standard Accessories - ABATEC WAVE 1 Mode D'emploi

1.3.0

SCOPE OF APPLICATION

Heating control unit for sauna cabins.
Ready for use only with the supplied original
accessories: cables and temperature
sensor with thermal safety release, etc.
1.4.0

OVERVIEW/CLEANING

Electronic control unit for sauna heaters.
The microprocessor-controlled control unit
covers a control range from 50 ° C to
110 ° C. The power unit controls the
temperature and the internal cabin light.
Max. heater output: 9 kW.
Cleaning of the housing:
The cleaning intervals depend on the
degree of dirt collection. Disconnect the
control unit completely from the supply line!
Do not disassemble! Carefully wipe the front
of the housing with a soft cloth slightly
moistened with soapy water. Do not clean
the back of the housing and the printed
circuit board behind it. If required, call
service personnel.
1.5.0

STANDARD ACCESSORIES

The scope of supply includes:
1. Base unit
2. Sensor cable and installation material
3. Temperature sensor with 139 ° C
thermal safety release incl. housing
WE DO IT FIRST.
BEDIENUNGSANLEITUNG INSTRUCTION MANUAL
18/42