Unit Description; General; Operational Mode - ABATEC WAVE 1 Mode D'emploi

1.0.0

UNIT DESCRIPTION

1.1.0

GENERAL

The control unit is used exclusively for
controlling sauna cabins. For normal
operation, the base unit and the
temperature sensor with cable are required
besides the heater.
basic module
WE DO IT FIRST.
BEDIENUNGSANLEITUNG INSTRUCTION MANUAL
sensor
It is essential to follow the
installation instructions when
wiring the components!
1.2.0

OPERATIONAL MODE

The control unit is ready for operation, when
all installations have been completed.
By turning the lower thumbwheel, the sauna
control unit is started and the operational
mode can be selected (refer to section 2.0.0
"Sauna operation").
17/42