Connecting The Power Supply - Maxell MA-XL1 Manuel D'utilisation

Connecting the power supply

1. Connect the power cord to the Power adaptor.
2. Put the DC plug of the power adaptor into the DC 24V connector of the product.
3. Firmly plug the power cord's plug into the outlet. In a couple of seconds after the
power supply connection, the POWER indicator lights up in steady red.
DC plug
• Use extra caution when connecting the power cord, as incorrect or faulty connections may
result in fire and/or electrical shock.
- Do not touch the power cord with a wet hand.
- Only use the Power cord and the Power adaptor that came with the product. If it is
damaged, consult your dealer to get a new one. Never modify the power cord and the
Power adaptor.
- Only plug the power cord into an outlet whose voltage is matched to the power cord. The
power outlet should be close to the product and easily accessible. Remove the power cord
for complete separation.
- Do not distribute the power supply to multiple devices. Doing so may overload the outlet
and connectors, loosen the connection, or result in fire, electric shock or other accidents.
- Connect the terminal for the AC inlet of power adaptor to the power outlet of the building
using an appropriate power cord (bundled).
- When multiple power cords are included, please use the power cord that matches the
outlet shape.
- Do not use with the power adaptor hanging.
- Do not trample the power adaptor or cord.
• This power adaptor is also designed for IT power systems with a phase-to-phase voltage of
220 to 240 V.
Power adaptor
Model No.
UNI360-2425 for USA and CANADA
UEA360-2425 for other countries/regions
WARNING
!
NOTICE
Power cord
10
Power button / indicator