Placement - Maxell MA-XL1 Manuel D'utilisation

Placement

Please set this product to level. This product can be mounted into a rack (for 19-inch
rack) with the
provided "rack mount bracket". When attaching the rack mount bracket to the main
unit, be sure to use the provided screws. For details, consult the Operating Guide.
Please follow the manual of the rack to mount.
Please take a distance of more than 2 cm between the product and the wall.
2 cm or greater
• Install the product where you can access the power outlet easily.
• Do not install the product near thermally conductive or flammable things.
• Do not place the product in a place where it may get wet.
• Do not place the product where any oils, such as cooking or machine oil, are used. Oil
may harm the product, resulting in malfunction, or falling from the mounted position.
• Install the product in a stable horizontal position.
- Do not put the product on its side, front or rear position
- Do not attach nor place anything on the product unless otherwise specified in the manual.
• Do not block the intake vents and exhaust vents of the product. If the intake vents and
exhaust vents of the product are blocked, the accumulated inside heat may cause fire.
• When attaching the rack mount to the main unit, be sure to use the provided screws.
Using other screws may cause failure, fire, or electric shock.
• Place the product in a cool place with sufficient ventilation.
- Do not stop up, block nor cover the product's vent holes.
- Do not place the product at places that are exposed to magnetic fields, doing so can
cause the cooling fans inside the product to malfunction.
• Avoid placing the product in smoky, humid or dusty place.
- Do not place the product near humidifiers.
• Do not place the product in a place where radio interference may be caused.
WARNING
!
CAUTION
!
NOTICE
08
(1)
2 cm or greater