Table des Matières
Publicité
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet or on the transmitter on the remote control.
Condensation can cause the speaker to malfunction. If this
happens, leave the power on until normal playback is possible
(about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the speaker.
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the speaker to the stand-by mode and turn the power on
again.
2. If the speaker is not restored in the previous operation,
unplug and plug in the speaker, and then turn the power on.
Factory reset, clearing all setting
Make sure to disconnect all audio input cables attached to the
speaker before performing the factory reset.
Can be operated on the remote control only.
1. Press the ON/STAND-BY button to enter the power stand-by
mode.
2. Press and hold the ON/STAND-BY button until "CL" appears.
Caution:
This operation will erase all data stored in memory.
HT-SB400
ENGLISH
E-16
Publicité
Table des Matières
