Pride Mobility TRAVEL SCOOTER Série Mode D'emploi page 18

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

I I I . B AT T E R I E S A N D C H A R G I N G
NOTE: Some batteries require the removal of a nut and
bolt when disconnecting the battery cable from the battery
terminal. See fi gure 15.
To change batteries in Battery Pack Style B (see fi gure 6):
1. Disconnect the battery harness and remove the battery pack
from the Travel Scooter. See fi gure 16.
2. Unzip the battery pack to expose the batteries.
WARNING! To avoid confusion when replacing
batteries, replace one battery at a time.
3. Disconnect the black (-) and red (+) battery cables from the
battery terminals of the fi rst battery.
4. Remove the old battery.
5. Place the new battery into the battery pack.
6. Connect the red battery cable to the positive (+) battery
terminal of the fi rst battery.
7. Connect the black battery cable to the negative (-) battery
terminal of the fi rst battery.
8. Repeat steps 3-7 for the other battery.
9. Completely zip the battery pack.
10. Reinstall the battery pack and connect the battery harness.
To change batteries in Battery Pack Style C (see fi gure 6):
1. Remove the seat and rear shroud.
2. Disconnect the battery harnesses and tie-down strap then
remove the battery pack from the Travel Scooter. See
fi gure 16.
3. Unzip the battery pack to expose the batteries.
WARNING! To avoid confusion when replacing
batteries, replace one battery at a time.
4. Disconnect the black (-) and red (+) battery cables from the
battery terminals of the fi rst battery.
5. Remove the old battery.
6. Place the new battery into the battery pack.
7. Connect the red battery cable to the positive (+) battery
terminal of the fi rst battery.
8. Connect the black battery cable to the negative (-) battery
terminal of fi rst battery.
9. Repeat steps 4-8 for the other battery.
10. Completely zip the battery pack closed.
11. Reinstall the battery pack then connect the battery harnesses
and battery tie-down strap.
12. Reinstall the rear shroud and seat.
NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and contact your
local waste disposal agency or authorized Provider for instructions on disposal and battery recycling which is
our recommended course of action.
18
Figure 15. Disconnecting the Battery Cable on
a 17-22 Ah Battery Box
IDENTIFICATION KEY
1.
Battery Tie-Down Strap
2.
Front-to-Rear Harness
3.
Battery Harness
2
1
Figure 16. Battery Tie-down Strap
3
Travel Scooter Series

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Go-go sport 4-wheelGo-go ultra x 4-wheelGo-go elite traveller 4-wheel

Table des Matières