Table Des Matières - Oleo-Mac efco ARTIK 52 Manuel D'utilisation Et D'entretien

TRANSLATION OF ORIGINAL INSTRUCTIONS
INTRODUCTION
For correct use of the machine and to avoid
accidents, do not start working until you have
read this manual carefully. You will find
explanations concerning the operation of the
various parts plus instructions for necessary
checks and relative maintenance.
NOTE: The descriptions and illustrations
contained in this manual are not binding.
The manufacturer reserves the right to
undertake any modifications it deems
necessary without revising this manual.
In addition to the operating instructions, this
manual contains paragraphs that require your
CONTENTS
1. SAFETY PRECAUTIONS
(precautions for using the machine
safety) _________________________ 22
2. SYMBOLS AND SAFETY WARNINGS
(explanations on how to identify the
machine and the meaning of the
symbols) _______________________ 23
3. MAIN COMPONENTS
(position of the main parts that make
up the machine) _________________ 23
4. ASSEMBLY (explanations on how to
remove the packaging and assemble
detached parts) _________________ 24
5. INSTRUCTIONS FOR USE
(instructions for the effective and safe
use of the machine) ______________ 25
- 5.1 Preliminary Operations Before
Starting Work ___________________ 26
- 5.2 Using the Machine _______________ 28
- 5.3 Transporting ____________________ 30
special attention. Such paragraphs are marked
with the symbols described below:
WARNING: where there is a risk of an accident
or personal, even fatal, injury or serious damage
to property.
CAUTION: where there is a risk of damaging the
machine or its individual components.
WARNING
RISK OF HEARING DAMAGE
IN NORMAL CONDITIONS OF USE, THIS
MACHINE MAY EXPOSE THE OPERATOR TO A
PERSONAL DAILY NOISE LEVEL EQUAL TO OR
HIGHER THAN
85 dB (A)
6. MAINTENANCE
(all information required to keep the
machine at peak efficiency) ________ 31
- 6.1 Safety Recommendations _________ 31
- 6.2 Routine Maintenance _____________ 31
7. ENVIRONMENTAL PROTECTION
(advice on using the machine in ways
that respect the environment) ______ 33
8. TECHNICAL DATA (a summary of the
main specifications of the machine) _ 34
9. DECLARATION OF CONFORMITY __ 34
10. WARRANTY CERTIFICATE
(a summary of the warranty
conditions) _____________________ 35
11. TROUBLESHOOTING
(helps you to quickly solve any
problems you may encounter while
using the machine) _______________ 36
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
21