User's Manual; Stand; Operating The Light; On/Off Switch - KaWe MASTERLIGHT LED 1000 Mode D'emploi

1
1. Put on the mounting block.
2
2. Insert the two foot pieces with lockable castors across from one
another.
3
3. Insert the three foot pieces with non-locking castors.
4
4. Screw in the hexagon head screw.
14
5
5. Tighten the hexagon head screw.

4. USER'S MANUAL

4.1 Stand

Adjust to desired height.
Engage the brake on the lockable castors.
To move the lamp, release the brakes on the castors.

4.2 Operating the light

4.2.1 ON/OFF switch

The KaWe examination light is turned OFF and ON by pressing on the
switch 16 on the light body.

4.2.2 Positioning

To adjust the position of the light arm, use the clamping lever 17 on
the cross arm. The light body can be moved in the shown direction. The
flexible joint G holds the light body in the desired position.
Caution! Positioning the KaWe examination light at
an angle of less than 90° is not allowed as this may damage
the flexible hose connection.

5. CLEANING

5.1 Stand
The surface of the floor stand can be easily kept clean by wip-
ing it with a damp cloth. Any common cleaning agents may be used.

5.2 Light body

The surface of the KaWe examination light is made of a high-quality
material that can be cleaned by wiping it with a cloth and convention-
al liquid cleaning agents.

5.3 Protective screen

The protective screen 20 is made of a high-quality plastic. Pay atten-
tion to the following during cleaning:
• Always clean the screen 20 with a wet cloth (never clean with a dry
cloth!).
• The protective screen 20 is to be wiped with an anti-static agent
using a lint-free cloth.
15