Teac AG-H380 Mode D'emploi page 20

To check the programmed order
In the stop mode, press the PROGRAM button repeatedly. The
song number and programme number will be shown on the
display.
To add a file to the programme
In the stop mode, press the PROGRAM button repeatedly until
the programme number you want to insert a file appears on the
display. If you want to add a file to the end of the programme,
press the PROGRAM button repeatedly until "P-END" briefly
appears on the display.
Then select a file using the ˙ or ¥ button. The file is added to
the programme.
To delete a file from the programme
In the stop mode, press the PROGRAM button repeatedly until
the programme number to be deleted appears on the display,
then press the CLEAR button. The selected file is deleted from
the programme.
20
Programmed Playback (USB) (2)
To clear the programme
1. In the stop mode, press the PROGRAM button.
2. Hold down the CLEAR button for more than 4 seconds.
< If one of the following buttons is pressed, the programmed
contents will also be cleared:
SOURCE (TUNER, CD, AUX1/2, PHONO), POWER
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.