REHM TIGER 170 Instructions De Service page 5

2 The following safety precautions must be taken
Dry protective clothing must be worn. The eyes and face must be protected by welding
goggles.
The unit must only be used and operated using earthed power sockets and mains cables
with the earth conductors properly connected in accordance with the local electrical
regulations.
The unit must only be maintained and serviced by suitably trained and qualified staff.
In the event of problems, please contact REHM Customer Service on +49 7161 3007-85.
Accident Prevention Regulation "Welding, Cutting and Related Processes" (BGR 500) must
be observed during the operation of this unit. The main hazards to be observed are:

Fire and explosion

Harmful substances (gases, fumes, smoke / dust)

Ultra violet radiation

Electrical hazards

Operator errors
The units are intended for stick electrode welding (MMA) and TIG welding. They must be
operated only by personnel who have been correctly trained and are qualified in the use and
maintenance of such welding equipment.
The unit is designed in accordance with EN 55011 for Group 2 Class A and is suitable for
use in all areas, with the exception of residential areas and premises directly connected to a
low voltage network which also supplies residential buildings.
3