Water Filter; Attaching The Internal Filter Into The - Blomberg BRFD2230SS Manuel D'utilisation

Masquer les pouces Voir aussi pour BRFD2230SS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

3.10 Water filter

(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on its model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
3.10.1 Attaching the internal
filter into the refrigerator
1. Pull the water filter cover slowly.
2. Remove the water filter bypass cover by turning
it downwards.
A
WARNING:
is enabled before removing the by-pass
cover.
C
It is normal that a few drops of water drip
after the cover has been removed.
3. Seat the water filter cover into the mechanism
and push forwards to lock it in place.
4. Press "Ice Off" button on the display again to
exit this mode.
12 /34 EN
Ensure that the Ice Off mode
Refrigerator / User Manual

Publicité

Table des Matières
loading

Table des Matières