Water Connection; Connecting The Water Hose To The Refrigerator; Connecting The Water Line To The Water Supply; Water Filter - Blomberg BSBS2230SS Manuel D'utilisation

Installation

3.5. Water connection

Depending on the model of the refrigerator, you
can connect it either to a demijohn or water mains.
First you must connect the water hose to the
refrigerator.
C
In cases where a demijohn is used, a
separate pump must also be used.
Refrigerator / User Guide
A
WARNING:
any, must be unplugged during connection.
C
Following parts may not be supplied with
your product since they are not required
when using a demijohn.
Your product comes with an internal water filter for
use inside the fridge. Part number of the filter is
4918450200 and you can use this part number
when ordering replacement filters.
3.6. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose (a).
2. Push the water hose downwards firmly to slip it
onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure it onto
the water inlet valve.
C
Normally, you are not required to tighten
the union with a tool. However, you can use
a spanner or pliers to tighten the union if
there is a leakage.
3.7. Connecting the water
line to the water supply
Connect the water line to a water supply valve. If a
valve is not present or you are not sure, consult a
qualified plumber.

3.8. Water filter

(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on its model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
9 / 29 EN
Refrigerator and the pump, if