Power Connection; Connecting The Water Hose To The Refrigerator; Connecting The Water Line To The Water Supply - Blomberg BRFB1512SS Manuel D'utilisation

Installation

3.4. Power connection

A
WARNING:
sockets in power connection.
B
WARNING:
be replaced by Authorized Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
• Our firm will not assume responsibility for
any damages due to usage without earthing
and power connection in compliance with
national regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the refrigerator to an earthed
socket with 110V/6 0 Hz voltage. The plug
must comprise a 10-16A fuse.
• Do not use multi-group plug with or without
extension cable between the wall socket
and the refrigerator.
Refrigerator / User Guide
Do not use extension or multi
Damaged power cable must
3.5. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose
(a).
2. Push the water hose downwards firmly
to slip it onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure
it onto the water inlet valve.
C
Normally, you are not required to
tighten the union with a tool. However, you can
use a spanner or pliers to tighten the union if
there is a leakage
3.6. Connecting the water
line to the water supply
Connect the water line to a water supply valve.
If a valve is not present or you are not sure,
consult a qualified plumber.
9/23EN