Brita FF-100 Guide De L'utilisateur page 6

Filter Replacement Indicator
Regular filter replacement is the key to ensuring healthier and great-tasting water. The Brita® Faucet
Filtration System makes it easy for you to know when to change your filter.
The Filter Replacement Indicator monitors the filter life and tells you when to replace the filter
cartridge, based on average water quality and filtered water usage by the average family of four.
The Filter Replacement Indicator will signal the need for replacement after approximately
100 gallons/378 liters or 4 months, whichever comes first.
Each time you begin filtering water, a light will illuminate to signal the filter status.
INDICATOR LIGHT
Flashing Green
Flashing Amber
Flashing Red
Replacing filter cartridge
Replacing the filter cartridge is easy. If the Filter
Replacement Indicator flashes red when you switch to the
filtered Brita® water setting, it is time to replace the filter
cartridge. Prompt filter replacement assures you of healthier,
great-tasting water.
To remove the old cartridge, turn water off, press the filter
cartridge release button located at the back of the filter cup
and pull cartridge up to remove it. To insert a new cartridge,
follow the directions in Step 4.
Brita® Faucet Replacement Filters are available in white or
chrome finish.
NOTE:
If the filter is removed for cleaning purposes (e.g., for rinsing
or wiping off) while in green mode, please insert filter back into unit
within 30 seconds to make sure the counter is not reset. However, once
the Filter Replacement Indicator has begun to show a red light (indicating
the Replacement Period), do not remove the cartridge unless you intend to replace it. Once the filter has entered the
Replacement Warning Period, inserting a cartridge will automatically reset the Filter Replacement Indicator.
NOTE:
Only the Brita® Faucet Replacement Filters will fit the Brita® Faucet Filtration System.
FILTER STATUS
Filter Working
When switched to the filtered Brita® water setting, the green light will
flash to show your filter is working.
Change Filter Soon
When switched to the filtered Brita® water setting, the amber light will
flash when your filter has 2 weeks or approximately 20 gallons/75 liters of
life left. Your filter is working, but it has entered the Replacement Warning
Period signaling that the filter will need to be replaced soon.
Change Filter Now
When switched to the filtered Brita® water setting, the red light will
flash to indicate that your filter cartridge has reached the end of
its life and needs to be replaced now.
4
Back View
Filter Cartridge
Release Button