Fini Pulsar Série Manuel Utilisateur page 18

Preserve this handbook for future reference
G
B
1. PRECAUTIONS
These compressors are not suitable for
outdoor use.
THINGS TO DO
● The compressor must be used in a suitable
environment (well ventilated with an ambient
temperature of between +5°C and +40°C) and
never in places affected by dust, acids, vapors,
explosive or flammable gases.
● Always maintain a safety distance of at least 4
meters between the compressor and the work area.
● Always maintain a safety distance of at least 4
meters between the compressor and the work area.
● The compressor must be placed horizontally on a
stable surface to guarantee correct functioning and
correct lubrication.
● Before connecting the compressor, check that
the mains voltage complies with the electrical
characteristics of the motor.
● Use extension cables with the maximum length of
5 meters and with a suitable cross-section. Use of
extensions of different length and also adaptors and
multiple-sockets should be avoided.
● To switch off the compressor always use the switch
or the selector on the control panel. Never switch
off the compressor by pulling out the plug to avoid
restart with the head of the compressor pressurized
(in versions not equipped with electrovalves).
● Use suitable equipment to transport the compressor
(e.g.: transpallets, fork-lift trucks, etc.).
● Use of compressed air in the various possible
applications (inflation, airpowered tools, painting,
washing, etc.) requires knowledge and compliance
with the respective regulations.
● Start the machine only after checking that all the
guards have been correctly fitted and that no-one
can be injured, directly or indirectly, by jets of air
from pipes that may be pressurized without prior
warning.
● Ventilate the work place in order to appropriate dilute
the air discharged into the environment.
● Please check that the air consumption and the
maximum working pressure of the pneumatic
tool to be used are compatible with the pressure
set on the pressure regulator and with the
amount of air supplied by the compressor.
Prematic AG, 9556 Affeltrangen
THINGS
● Never direct the jet of air towards persons, animals or
your body. (Always wear safety goggles to protect your
eyes against flying objects that may be lifted by the jet of
air).
● Never direct the jet of liquids sprayed by tools connected
to the compressor towards the compressor.
● Never use the appliance with bare feet or wet hands or
feet.
● Never pull the power cable to disconnect the plug from
the socket or to move the compressor.
● Never leave the appliance exposed to adverse weather
conditions.
● Never transport the compressor with the reservoir under
pressure (for models envisaging this).
● Do not weld or machine the receiver. In the case of faults
or rusting, replace the entire receiver.
● Never allow inexpert persons to use the compressor. Keep
children and animals at a distance from the work area.
● This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a
person responsible for their safety.
● Children should be supervised to ensure that they do not
play with the appliance.
● Do not position flammable or nylon/fabric objects closed
to and/or on the compressor.
● Never clean the compressor with flammable liquids
or solvents. Check that you have unplugged the
compressor and clean with a damp cloth only.
● The compressor must be used only for air compression.
Do not use the compressor for any other type of gas.
● The compressed air produced by the compressor cannot
not be used for pharmaceutical, food or medical purposes
except after particular treatments and cannot be used to
fill the air bottles of scuba divers.
● Never use the compressor without guards (belt guard)
and never touch moving parts.
THINGS YOU SHOULD KNOW
• POWER SUPPLY
All machines, with both direct and Star/Delta start-up,
are equipped for 400V/50Hz three-phase voltage,
except for the single-phase, which is designed for a
voltage of 230V/50Hz.
The wiring diagrams are located inside the cabinet.
18
www.prematic.ch Tel. 071 918 60 60, info@prematic.ch
NOT
TO DO