HQ Power VDP150CC4 Mode D'emploi page 4

For example if the start address should be 95, the settings would be (for the first 9 switches): 111110100 (1 + 2 + 4 +
8 + 16 + 0 + 64 + 0 + 0= 95)
The LED next to the DIP-switches indicates the status of the DMX signal.
LED flashing: DMX signal present
LED steady off: no input DMX signal
LED steady on: program mode
In order to select the program mode DIP switch 10 must be set to on and no connection should exist with a DMX
controller.
The different programs are selected via DIP switches 1, 2 and 3.
10 + 3 + 2 + 1
The device can also be used in master/slave configuration.
Select the master device by putting DIP switch 11 to the ON position. Select the slaves by putting DIP switch 1 to the
ON position, all others to OFF.
6. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections ...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the lamp (see "4. Installation").
8. Contact your dealer for spare parts if necessary.
7. Technical Specifications
Power Supply
Power Consumption
Lamp
Dimensions
Total Weight
Max. ambient temperature
Max. housing temperature
The specifications and contents in this manual are subject to change without prior notice.
VDP150CC4
DIP switch
10 + 1
10 + 2
10 + 2 + 1
10 + 3
10 + 3 + 1
10 + 3 + 2
max. 230Vac/50Hz
max. 350W
1 x 70V / 150W CDM/T G12 socket, metal halide (article number: LAMP150HTI/2)
180 x 345 x 495mm
12kg
45°C
160°C
CMY, fast change, short step time
CMY, fast change, long step time
CMY, slow change, short step time
CMY, slow change, long step time
4
Program
cyan
yellow
magenta
VELLEMAN