Basic Settings; Setting The Clock; Hiding/Displaying The Clock; Safety Blocking - Porter & Charles Combi Speed Mode D'emploi

USA

Basic settings

Setting the clock

After your microwave oven is first plugged in or
after a power failure, the clock display will flash to
indicate that the time shown is not correct. To set
the clock, proceed as follows:
1. Press the Clock
Clock/Duration display is showing the clock.
The hour numbers will start to flash.
2. Press the "+" and "-" keys to set the correct
hour value.

Hiding/Displaying the Clock

If the clock display disturbs you, you can hide it by
pressing the Clock key for 3 seconds. The dots
that separate the hours and minutes will flash but
the rest of the clock display will be hidden.

Safety blocking

The oven operation can be blocked (for example,
to stop it from being used by children).
1. To block the oven, press the Safety Block
key (2) for 3 seconds. You will hear a sound
signal and the message "SAFE" will be
displayed. Safety Block indicator
illuminate. The oven is blocked in this state
and cannot be used.
13
key (5) when
3. Press again the Clock key (5) to set the
minutes. The minute numbers will start to
flash.
4. Press the "+" and "-" keys to set the correct
the minute value.
5. To finish, press the Clock key (5) again.
If you want to see the clock display again, press
the Clock key again for 3 seconds.
2. To unblock the oven, press the Safety Block
key (2) again for 3 seconds. You will hear a
sound signal and the Safety Block indicator will
turn off.
will