Twin-Star 26TF2322 Manuel D'instruction page 7

18. Open the Right Front Door (K) and cooler
door, connect the Right Front Door (K) to the
cooler door with the Door Clip (R). Close
door and adjust the wine cooler forwards or
backwards to insure a smooth operation of
the door with a tight seal.
Note: Installing the clip with the door
open at a 45 degree angle will help
insure a smooth operation through
the full motion of the door.
19. Choose desired height of Shelf (H) and
place the four Shelf Pin (O) into same height
shelf holes inside side panels. Insert Wood
Shelf (H), allow Wood Shelf (H) to rest
on the Shelf Pin (O).
20. Insert Stabilizer Frame (U) once the cooler is
in the correct position. Fasten the positioning
panel with wood screws (Q3). Wedge the
Stabilizer Frame (U) between the top of the
cooler and mantel. Fasten with wood screws
(Q3).
E-6
Wood
Shelf
H
O
Shelf Pin
Stabilizer
U
Frame
Q3
Q3
Q3
T
Positioning
Panel
Q2
R
Door
Clip