Twin-Star 26TF2322 Manuel D'instruction page 3

PLEASE READ AND FOLLOW ALL SAFETY TIPS
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make
sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• Some steps are more easily handled with two adults.
• Attach the fi replace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fi replace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on any part of the mantel.
1. Dust your fi replace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fi replace with a gentle non-abrasive household cleaner. Make sure to dry your
fi replace immediately with a soft cloth or towel.
For a complete tight fi t every bolt
should have a fl at washer.
All panels are labeled Left and Right as
viewed from the front of unit.
1. Locate the Center Left Side Panel (B), Center
Right Side Panel (C), Center Shelf (D), and
set out face down on a scratch-free surface.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
3. Push the Center Left Side Panel and Center
Right Side Panel snug to the Center Shelf (D).
Make sure the Wood Dowels are seated in
the pre-drilled holes.
HAND TIGHTEN ONLY.
E-2
GETTING STARTED
CAUTION:
HELPFUL HINTS
CARE & CLEANING
B
Center
Left
Side
Panel
Center Shelf
N
D
M
N
C
N
Center
L
Right
Side
Panel