Twin-Star 26TF2322 Manuel D'instruction page 6

14. Locate Right Front Door (K) and Left
Front Door (J). Slide door hinge keyhole
into panel hinge bracket. (Diagram 1)
Use Phillips Head Screwdriver to tighten
screws. (Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward change
keyhole slot position.
(As Shown In Diagram 3a)
To adjust door right or left loosen / tighten
screw.
(As Shown In Diagram 3b)
To adjust door up or down adjust
bracket height.
(As Shown In Diagram 3c).
15. Attach the Handle (V) to the Left Front
Door (J) and Right Front Door (K), use
the bolts attached through the pre-drilled
holes in the doors. Then use a Phillips
Head Screwdriver to tighten the bolts.
16. There are levelers located under the mantel
which the height can be increased by
twisting counter-clockwise.
PLEASE READ ALL "WINE COOLER"
INSTRUCTIONS PRIOR TO
INSTALLING THE
THERMOELECTRIC COOLER IN
YOUR MANTEL.
17. Insert the wine cooler feet into the holes
of the Positioning Panel (T). Push the
panel forward until the cooler makes
contact with the front frame of the mantel.
E-5
2
1
Left
Front
J Door
Leveler
T
Positioning
Panel
3
a b
c
Right
Front
Door
K
V
Handle
(with bolt)