Hendi 270196 Mode D'emploi page 5

User instructions
• Plug into suitable electrical socket.
• Switch on the appliance.
• The fluorescent tube should work now.
Suitable for a room with an area of 120m2 maximum.
Best place for instalment
• Away from windows or doors because of draft and
daylight.
• Away from places where food will be prepared or
presented.
• Close to the area where flies come in but away
from draft and wind.
• Somewhere the appliance can stay 24 hours a day.
Replacement of tubes & adhesive plate
• Remove the plug from the socket.
• Open the cover of the appliance to replace the tube
(270240) and the adhesive plate (270233).
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance.
• Beware: Never immerse the appliance in water or
any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
Technical specifications:
Model:
Input voltage:
Technical specifications are subject to change without prior notice.
270196
220-240V~ 50/60Hz
• If the appliance isn't used for an extended period
of time, unplug the appliance from the electrical
outlet.
• Above eye level and so that no one can bump the
appliance.
• Out of reach from flammable objects like curtains,
lace curtains etc.
• Away from flammable liquids or gases. DANGER
OF EXPLOSION
• This appliance is suitable for indoor use only.
• Replace the adhesive plate at least once a month.
Also replace the adhesive plate once its full with
insects.
sives. Do not use any sharp or pointed objects. Do
not use petrol or solvents! Clean with a damp cloth
and detergent if necessary. Do not use abrasive
materials.
• Clean the ventilation slots (if applicable) with the
vacuum cleaner.
Power:
Max. coverage area:
36W
120m
2
5
EN