Candy CVMI970LX Notice D'installation Et D'utilisation page 8


The electrical connection must
noted on the rating plate, which is placed inside the cooker hood. The
appliance should now be connected to the electrical supply. See page 16-
17 for detailed information on the

Check that the appliance is operating correctly by selecting eachspeed and
switching the light bulbs on and off.

Remove the hanging hook and then slide the lower chimneysection downwards,
until it rests against the main body of the cooker hood.

Use a stainless steel cleaner and polish on the stainless steel sections of the
appliance.

If you are using the appliance in recirculation mode, then you should now fit
the carbon filter. See the "fitting the carbon filter" section on pages 14 一 15.
8
5) If the glass canopy has not been
pre-assembled by the factory, then it
should be fixed to the top of the main
body of the cooker hood at this stage.
6) Lift the main body of the cooker hood
onto the angle bar and then fix it into
position using the 16 x M5 screws.
 IMPORTANT: This stage of the
installation
completed by two people.
 IMPORTANT: The 16 x M5 screws
MUST be securely tightened.
7) If you are going to be using the hood in
extraction mode, you should fix the
ducting
hose to the spigot.
correspond to the electrical
electrical connection.
process MUST
repuirement
be