Positioning; Leveling The Refrigerator; Installing The Temperature Indicator; Cleaning Before Use - Brandy Best TOP55 Notice D'emploi

Positioning

Position the device in front of the desired location and gently slide it to its position.
Two people are needed to move the device.

Leveling the refrigerator

Once the unit is in its final place, be sure to level it. For this, the adjustment can be done using the two ad-
justment feet at the front of the unit.
If it is not level, the alignment of doors and magnetic joints will be affected.

Installing the temperature indicator

To help you adjust your refrigerator, it is equipped with a temperature indicator that will control the average
temperature in the coldest area.
To install the temperature indicator, please observe the indications according to the diagrams below.
WARNING: this indicator is intended to work only with your refrigerator, be careful not to use it in another
refrigerator (indeed, the colder zone is not identical), or for any other use.
TEMPERATURE INDICATOR: THE MOST COLD AREA OF YOUR REFRIGERATOR.
To properly position the temperature indicator (OK) + the cold zone indicator (this new sticker combines
both), make sure that the surface of the wall is perfectly clean and dry.

Cleaning before use

Wipe the inside of the unit with a mild solution of baking soda. Then rinse with warm water using a sponge
or cloth previously wrung out. Wipe the unit completely until no water is left before replacing the shelves and
drawers. You can clean the outside with mild soap
8