Publicité
Les langues disponibles
Les langues disponibles
G
NOTE!
When both desired temperature and timer off function have been activated, the
heater will switch on and off per the set temperature setting and will stop operating
once the programmed timer setting has been reached.
AUTO ON
Make sure to set the desired temperature prior to setting the timer, so that the heater
will shut off at the desired temperature setting. If the desired temperature is set, this
function will overrule the timer function.
With the Auto ON timer setting you can decide the time that the heater should automatically
switch on.
1.
Keep pressing the Mode button until the timer icon and the Auto ON icon appear.
2.
Use the + and - buttons to set the heater start time between 1 and 24 hours (default is 1
hour).
3.
The heater will automatically turn on when the set time expires.
G
NOTE!
When both desired temperature and timer on function have been activated, the
heater will switch on and off per the set temperature setting once the heater begins
to operate.
In the Auto-on function the heater will turn on after the set time has elapsed. If no
Auto-off time has been selected, a default timer of 10 hours will be applied to the
function.
FAHRENHEIT/CELSIUS FUNCTION
This heater offers the option to read the temperature setting in either Fahrenheit or Celsius.
Press F/C button to toggle between Fahrenheit and Celsius.
MAINTENANCE AND STORAGE
Allow the product to completely cool before handling or cleaning it.
Ensure the product is in the "O" OFF position and the Power Cord is unplugged from the electrical outlet
before cleaning the product.
•
Always ensure the product's housing is intact and completely assembled before each use.
•
Do not touch hot surfaces. Always use the handle of the product. Use protective mitts or gloves to
avoid serious burns or other personal injury.
•
Clean the exterior surface of the product by wiping it with a soft, damp cloth.
CAUTION:
Do not allow water or other liquids to run into the interior of the product, as this
could create a fire and/or electrical hazard.
•
Do not use any abrasive cleaners or solvents, as product damage will occur.
•
Store the product in a clean, dry place when it is not in use.
4
29
29
Publicité
