Edit A Chaser; Basic Settings; Rename Unit; Rename Effect - Futurelight CP-256 Mode D'emploi

6.9.4 Edit a chaser

Press the Menu-button and select "Menu 3 Make Chaser" via the Up/Down-buttons or the Data Entry fader.
Press the Enter-button. Select the menu "Chaser Edit" via the Up/Down-buttons or the Data Entry fader and
press the Enter-button. Select the desired chaser via the Up/Down-buttons or the Data Entry fader.
Press the Enter-button in order to edit step 1. Enter the desired picture via the Projector Select-buttons (e.g.
button 1, 2, 3 and 4 on) and press the Enter-button. Enter the Chaser-speed via the Up/Down-buttons or the
Data Entry fader and press the Enter-button.
Press the Right-button and edit step 2. Edit all desired steps and save the changes via the Escape and
Enter-button.

6.10 Basic settings

With the CP-256, you can adjust different basic settings like projector names, effect names, greeting text etc.
to the user's requirements.
Press the Menu-button and select "Menu 5 Setup" via the Up/Down-buttons or the Data Entry fader. Press
the Enter-button and the display shows "Code____". Enter the Code 2222 and press the Enter-button.

6.10.1 Rename unit

Select " Setup 1. Rename unit" via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Select the desired projector via the Up/Down-buttons or the Data Entry fader and press the Enter-button. The
cursor of the second field starts flashing and you can change the letters via the Up/Down-buttons or the Data
Entry fader. You can jump from one field to another using the Left/Right-buttons. As soon as you have
finished your inputs, press the Enter-button twice in order to save the settings.

6.10.2 Rename effect

Select " Setup 2. Rename effect" via the Up/Down-buttons or the Data Entry fader and press the Enter-
button. Select the desired effect via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
The cursor of the second field starts flashing and you can change the letters via the Up/Down-buttons or the
Data Entry fader. You can jump from one field to another using the Left/Right-buttons. As soon as you have
finished your inputs, press the Enter-button twice in order to save the settings.

6.10.3 Rename type

Select " Setup 3. Rename type" via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Select the desired projector via the Up/Down-buttons or the Data Entry fader and press the Enter-button. The
cursor of the second field starts flashing and you can change the letters via the Up/Down-buttons or the Data
Entry fader. You can jump from one field to another using the Left/Right-buttons. As soon as you have
finished your inputs, press the Enter-button twice in order to save the settings.

6.10.4 Configure unit

Select "Setup 4. Configure unit" via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Select the desired projector via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Enter the number of DMX-channels via the Data Entry fader or confirm the selection "16" with the Enter-
button. Enter the desired channel fader behind "Pot:" and confirm with the Enter-button. Select the desired
function and confirm with the Enter-button. Enter the respective channel of the projector and confirm with the
Enter-button. Select the desired effect and confirm with the Enter-button. Enter the respective DMX-value
and confirm with the Enter-button.
If you do not want to enter any more effects, press the Esc-button and enter the next channel. Please note
that the display does not show any function afterwards.
If the display says occupied, you can overwrite the occupation with the Enter-button.
After all effects have been entered, press the Escape-button and the display shows "B.Out: Scan?Dim?".
Select "Scan" for scanners and Moving Heads and "Dim" for dimmers via the Left/Right-buttons and confirm
with the Enter-button. Enter the Blackout-channel by pressing the respective Projector Select-button and
press the Enter-button. Enter the value for Chaser: Open and press the Enter-button. Enter the value for
Chaser: Closed and press the Enter-button. The display shows "Save changes?". Press the Enter-button in
order to save the settings or the Escape-button in order to return to the main menu.
37