Sound-Control; Chaser; Running A Chaser; Link A Program With A Chaser - Futurelight CP-256 Mode D'emploi

Press the Scene-button and the Copy-button. Enter from which program you want to copy which scene.
Enter to which program you want to copy which scene. Press the Enter-button twice.
Press the Program-button and the Copy-button. Enter from which program you want to copy where. Press
the Enter-button twice.
Press the Record-button and the Copy-button. Enter from which record you want to copy where. Press the
Enter-button twice.

6.8 Sound-control

You can activate the sound-control by pressing the Music-button (LED flashes). Please note that programs
and records are only active in this mode when the controller receives a music-signal (whether via the
microphone or the Audio-socket). If there is no music present, the program or record stops.
When programming records, you can determine the sound-control to be active or not for every program.

6.9 Chaser

A chaser is a sequence of different pictures that will be called up one after another. The light output of the
projector will be opened and closed again so that a very vivid movement appears. With the CP-256, you can
program up to 99 different records of which 16 can be assigned to the projector select buttons 1-16. Chaser
can be linked with programs or scenes.

6.9.1 Running a chaser

Press the Sequence-button and the current chaser will be run. By holding the Sequence-button, you can
enter the Chaser Edit-mode. If this mode is selected from a program, the chasers are shown that have been
defined during the programming. Here, you can manually select a chaser via the Projector Select-buttons
and adjust the Chaser-speed via the Data Entry Fader. As an alternative, you can activate the sound-control
via the Music-button.
If you wish to return to the chasers of the program, press the active Projector Select-button once more so
that the LED turns off.

6.9.2 Link a program with a chaser

With the CP-256, you can link programs and scenes of a program with an individual chaser.
Press the Menu-button and select "Menu 3 Make Chaser" via the Up/Down-buttons or the Data Entry fader.
Press the Enter-button. Select the menu "Chaser Link" via the Up/Down-buttons or the Data Entry fader and
press the Enter-button. Select the desired program via the projector select buttons.
Select the desired chaser for scene 1 via the Left/Right-button. Select the next scenes via the respective
Projector Select-button and enter the desired chaser. Press the Enter-button twice in order to save the
program.

6.9.3 Link a Preset Scene with a chaser

Press the Menu-button and select "Menu 3 Make Chaser" via the Up/Down-buttons or the Data Entry fader.
Press the Enter-button. Select the menu "Chaser Preset Link" via the Up/Down-buttons or the Data Entry
fader and press the Enter-button.
Select the desired chaser for Preset Scene 1 via the Left/Right-button. Select the next Preset Scenes via the
respective Projector Select-button and enter the desired chaser. Press the Enter-button twice in order to
save the Preset Scenes.
The occupation of the Projector Select-buttons in the menu "Link Chaser Preset" corresponds to the
occupation that can be recalled via the Sequence-button. If you wish to link another of the 99 available
chaser to a Projector Select-button, please proceed as described above.
36