Bosch GCM 8 SJL Professional Notice Originale page 26

OBJ_BUCH-1736-002.book Page 26 Wednesday, October 31, 2012 3:55 PM
26 | English
11 Retracting blade guard
12 Saw blade
13 Saw-Table extension
14 Fence
15 Saw table
16 Clamping lever of the saw-table extension
17 Scale for mitre angle
18 Insert plate
19 Locking bracket
20 Locking knob for various mitre angles
21 Mitre detent lever
22 Tilt protector
23 Mitre angle indicator
24 Detents for standard mitre angles
25 Mounting holes
26 Recessed handles
27 Adjustable fence
28 Locking screw of the adjustable fence
29 Material clamp
30 Stop for standard 45°, 22.5° and 33.9° bevel angles
31 Chip deflector
32 Depth stop
33 Locking screw for slide device
34 Allen key (5 mm)
35 Mounting holes for material clamp
36 Material stop*
37 Transport safety-lock
38 Laser warning label
39 Laser on/off switch (for marking of cutting line)
40 Clamping lever for any bevel angle
41 Scale for bevel angle
42 Indicator for bevel angle
43 Stop for 0° standard bevel angle
44 Spindle lock
45 Allen screw (size 5 mm) for mounting of saw blade
46 Clamping flange
47 Interior clamping flange
48 Threaded rod
49 Screws for insert plate
50 Lock screw of the material stop*
51 Clamping screw of the material stop*
52 Adjustment screw for laser position (parallelism)
53 Stop screw for 0° bevel angle
54 Screw for bevel angle indicator
55 Stop screw for 45° bevel angle
56 Screw for mitre angle indicator
57 Laser lens cover
58 Velcro strap
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 04K | (31.10.12)
Noise/Vibration Information
Measured sound values determined according to EN 61029.
Typically the A-weighted noise levels of the product are:
Sound pressure level 99 dB(A); Sound power level
112 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 61029:
2 2
a =2.5 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 61029 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 61029,
EN 60825-1 according to the provisions of the directives
2011/65/EU, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Helmut Heinzelmann
Senior Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 05.11.2012
Bosch Power Tools