i-tec USB-C Dual Display MST Manuel D'utilisation page 3


Audio – designation for audio input (microphone) or output (earphones / loudspeakers)
devices.
Please carefully read the entire manual before starting work with the docking station.
More information can be found in the manual on our website
the tab "Download" for this product.
SPECIFICATION
 1x USB-C 3.1 (Gen. 1) port for data transfer, transfer rate up to 5 Gbps; connecting another
monitor using this port is not supported, this can be achieved using Thunderbolt 3 docking
station.
 3x USB-A 3.0 port, transfer rate up to 5 Gbps; USB 3.0 port on front panel is with BC 1.2
specification
 1x USB-C Power Delivery with profile 4 (max. 60 W) for connecting to your laptop or tablet
 1x Ethernet GLAN RJ-45 port, 10/100/1000 Mbps
 Graphic interface:
One monitor: 1x HDMI max. resolution 3840x2160/30Hz or 1x Display Port max. resolution
3840x2160/30Hz
Two monitors (MST): supports up to 1920x1200/60Hz
 1x Audio/Microphone 2.1 Jack
 Mode: Extend, Mirror and Primary Display
 Supported colors 16 / 32 bit
 Power supply from external power adapter – output: DC 20V/5A
 OS: Requires USB-C interface with "DisplayPort Alternate Mode" and „Power Delivery"
support (not all devices / systems with USB-C interface support the standard) or
Thunderbolt 3 port – Windows 10 32/64bit, Mac OS X, Chrome OS and Android 6 (Google)
with Intel Broadwell Processor and R51 and higher
 Product dimensions: 155 x 85 x 27 mm
 Product weight: 172 g
PACKAGE CONTENTS
 i-tec USB-C MST docking station
 USB-C cable (100 cm)
 Power adapter (output: DC 20V/5A, max.100W, DC cable 200 cm + network cable 200 cm)
 Quick Start
DOCKING STATION DESCRIPTION / SPECIFICATION
Front panel:
1. 1x USB-A 3.0 port (data transfer rate up to 5 Gbps ) with fast charging according to spec. BC 1.2
– for connecting and rapid charging of USB devices
2. 1x USB-C 3.1 (Gen. 1) port – for connecting of USB-C devices and data transfer (e.g. HDD, flash
drive)
www.i-tec-europe.eu in