Getting Started; Power Supply; Connecting The External Monitor - Panasonic DC-BGH1 Manuel D'utilisation

Getting Started

Power supply

You can supply power to the camera using an AC adaptor (supplied), a
PoE+ compatible switching hub or PoE+ compatible injector (commercially
available), and a battery pack (optional).
Example: Supplying power with an AC adaptor
• Do not use any other AC adaptors except the supplied one. This may cause malfunction.
• Do not use any other AC mains leads except the supplied one. This may cause malfunction.

Connecting the external monitor

[SDI OUT] terminal
[HDMI] terminal
BNC cable (commercially available)
HDMI cable (commercially available)
External monitor or external recorder (commercially available)
• When connecting a BNC cable to the [GENLOCK IN] terminal or [TC IN/OUT]
terminal, use one that is less than 2.8 m (9.1 feet). It is recommended to use a
double shielded BNC cable equivalent to 5C-FB.
• Use a high speed HDMI cable (Type A - Type A plug) that is compatible with 4K
and has an HDMI logo.
14
DVQX2127 (ENG)